DELEM 3m CNC 3 Axis Press Brakes █ General Features: •CNC Press Brakes is overall welded and designed using SOLID WORKS 3D programming,Website:://.ahycnc.net, there is no any torsion bar connected two cylinders like WC67Y/K  press brake, CNC press brakes use German hydraulic proportional valves technology and linear encoder mounted on two sides of machine, The CNC controller reads the ram position from independent linear encoders while monitoring and adjusting the proportional valves, producing a double-closed loop system. •The main frame made of steel welded constructions,has been designed according minimum stretch and optimum resistance standards. •Accuracy is further ensured by mounting the linear encoders on a C frame connected to the bed, rather than directly on the side frames, so deflection of the side frames and pressure loads do not affect positioning. • The Y1 and Y2 axes operate as independent double acting hydraulic systems. Both axis share the same oil supply, but the flow to the valves as well as true positions of the ram are entirely and separately controlled by CNC press brake controller. •Using CNC boring