● General Description:
ALTEK's SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
● Quick Details:
► Dual data-rate of 1.25Gbps/1.063Gbps operation;
► 1310nm FP laser and PIN photo detector for 40km transmission;
► Compliant with SFP MSA and SFF-8472 with duplex LC receptacle;
► 1310nm DFB transmitter, PIN photo-detector;
► Internal Calibration or External Calibration;
► Low power consumption;
► Applicable for 10km SMF connection;
► All-metal housing for superior EMI performance;
► Advanced firmware allow customer system encryption information to be stored in transceiver;
► Compatible with RoHS.
● Application:
► Gigabit Ethernet;
► Fiber Channel;
► Switch to Switch interface;
► Switched back plane applications;
► Other optical transmission systems.
● Description:
Form Factor | SFP |
Compatibility |
Cisco Compatible |
Distance |
10km |
Max Data Rate |
1000Mbps |
Wavelength |
1310nm-TX |
Max Cable Distance |
10km over OM2 MMF |
Interface |
LC Simplex |
Verification Optical Components |
DFB BiDi |
DOM Support |
Yes |
Cable Type |
SMF |
TX Power |
-9.5 ~ - 3dBm |
Receiver Sensitivity |
< -17dBm |
HS Code |
Optical fibre cables-85447000.00 |
● Optical characteristics transceiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
40km | |||||
Centre Wavelength BXD |
λC |
1320 |
1330 |
1340 |
nm |
Centre Wavelength BXU |
λC |
1260 |
1270 |
1280 |
nm |
Spectral Width (RMS) |
σ |
1 |
nm |
||
Average Output Power |
P0ut |
-3 |
+2 |
dBm |
|
Extinction Ratio |
EX |
3.5 |
6 |
dB |
● Mechanical:
● Optical characteristics receiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
20km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-14.5 |
dBm |
||
Maximum input |
Pmax |
0 |
dBm |
||
LOS De-Assert |
LOSd |
-14 |
dBm |
||
LOS Assert |
LOSa |
-25 |
dBm |
||
LOS Hysteresis |
LOSh |
0.5 |
4 |
dBm |
|
40km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-16 |
dBm |
||
Maximum input |
Pmax |
0 |
dBm |
||
LOS De-Assert |
LOSd |
-17 |
dBm |
||
LOS Assert |
LOSa |
-27 |
dBm |
||
LOS Hysteresis |
LOSh |
0.5 |
4 |
dBm |
|
60km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
dBm |
||
Maximum input |
Pmax |
-7 |
dBm |
||
LOS De-Assert |
LOSd |
-23 |
dBm |
||
LOS Assert |
LOSa |
-33 |
dBm |
||
LOS Hysteresis |
LOSh |
0.5 |
4 |
dBm |
|
80km | |||||
Centre Wavelength BXD |
λC |
1480 |
1490 |
1500 |
nm |
Centre Wavelength BXU |
λC |
1530 |
1570 |
1580 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
-7 |
dBm |
|
Maximum input |
Pmax |
-7 |
dBm |
||
LOS De-Assert |
LOSd |
-24 |
dBm |
||
LOS Assert |
LOSa |
-34 |
dBm |
||
LOS Hysteresis |
LOSh |
0.5 |
dBm |
||
Dispersion penalty |
3.0 |
dBm |
● Electrical characteristics:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
Remarks |
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current 20km |
Icc |
270 |
350 |
mA |
||
Supply Current 40km |
300 |
450 |
mA |
|||
Supply Current 60km |
300 |
450 |
mA |
|||
Supply Current 80km |
500 |
mA |
||||
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current |
Icc |
300 |
mA |
|||
Reference Differential Input |
Zd |
100 |
mA |
|||
Input AC Common Mode Input |
0 |
25 |
mA |
|||
Differential Input Voltage Swing |
VID |
150 |
900 |
mA |
||
Total Jitter |
||||||
Data Dependant Jitter |
||||||
Uncorrelated Jitter |
||||||
Eye Mask |
See SFP+ MSA |
X1 |
UI |
|||
Eye Mask |
See SFP+ MSA |
X2 |
0.35 |
UI |
● Quality Certification:
Quality and standards are the foundation of FOCC. We are dedicated to providing customers with outstanding, standards-compliant products and services. FOCC has passed many quality system Certifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
● Lifetime Warranty:
All the fiber optic products in FOCC are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.